84 PRE-TRIP INSPECTION AND DAILY MAINTENANCE Suspension • Condition of springs (leaf or air), spring hangers, shackles and U-bolts. Axle alignment. Condition of torque rod arms. If equipped with sliding axles, check position and alignment. Look for damaged, worn or missing parts, all locks present, fully in place and locked. • Flexible air tubing not cracked, cut, crimped or otherwise damaged. It should be secured against tangling, dragging and chafing. Brakes • Condition of brake drums. With brakes released, look for a noticeable gap between lining and drum. (This check can not be made if dust covers are in place.) • Condition of brake hoses: check for any chafing.
• Check brake chamber mounting bolts and brackets. • Check slack adjusters and chamber push rod travel. With brakes applied or released, look for conspicuously different positions of the slack adjusters. Check spring brakes. Landing Gear or Dolly Area Step 14: Left Side of Trailer Area Fully raised; no missing or damaged parts. Crank handle present and secured. If power operated, no air/hydraulic leaks. Spare Wheel(s) • Spare wheel securely mounted in rack with no damage to rack. • Tire and wheel condition adequate for a spare: proper size, properly inflated. Lights and Reflectors • Trailer side clearance lights: clean, operating and proper color. Reflectors clean and proper color.