OPERATION 87 • Check the spring clip torque (U-bolts). (On REYCO suspensions, also check equalizer nut torque.) On chassis equipped with AIRTEK™front axle air suspensions, retorque the U-bolts. • Check the U-bolt torque on the MACK air suspension at the end of the first 1600 km (1000 miles). After the First 5000 Kilometers (3000 Miles) or Before 6400 Kilometers (4000 Miles) or Before 3 to 4 Months • Retorque the spring clip (U-bolts). (On REYCO suspensions, also retorque the equalizer nut.) Note: On chassis equipped with AIRTEK™front axle air suspensions, check the torque of the front axle U-bolts at 24 000 kilometers (15,000 miles).
Check front and rear axle alignment and adjust if the alignment is out of specifications. At the First A Inspection Interval Check steering knuckle to axle beam clearance. Although this quality-built vehicle has been inspected, lubricated and adjusted at the MACK Trucks Assembly Plant, an occasional air, oil or coolant leak may develop. Quick action to correct these minor items will prevent a major repair later. Take the vehicle to the nearest MACK service center as soon as any abnormal condition becomes evident.
Initial Valve Adjustment Intervals Refer to the Maintenance and Lubrication Manual (21394653) for detailed information concerning the Initial Valve Adjustment Interval also see page 223.