FOREWORD COATING MATERIALS PC300LL-6 00-9 Category Code Part No. Quantity Container Main applications, features Gasket seal- ant LG-4 790-129-9020 200 g Tube G Features: Resistance to water, oil G Used as sealant for flange surface, thread. G Also possible to use as sealant for flanges with large clearance. G Used as sealant for mating surfaces of final drive case, transmission case. LG-5 790-129-9080 1 kg Polyethylene container G Used as sealant for various threads, pipe joints, flanges. G Used as sealant for tapered plugs, elbows, nipples of hydraulic piping. LG-6 09940-00011 250 g Tube G Features: Silicon based, resistant to heat, cold. G Used as sealant for flange surface, thread.
G Used as sealant for oil pan, final drive case, etc. LG-7 09920-00150 150 g Tube G Features: Silicon based, quick hardening type. G Used as sealant for flywheel housing, intake manifold, oil pan, thermostat housing, etc. Three bond 1211 790-129-9090 100 g Tube G Used as heat-resisting sealant for repairing engines. Molybdenum disulphide lubricant LM-G 09940-00051 60 g Can G Used as lubricant for sliding parts (to pre- vent squeaking). LM-P 09940-00040 200 g Tube G Used to prevent seizure or scuffing of the thread when press fitting or shrink fitting. G Used as lubricant for linkage, bearings, etc.
Grease G2-LI SYG2-400LI SYG2-350LI SYG2-400LI-A SYG2-160LI SYGA160CNLI Various Various G General purpose type G2-CA SYG2-400CA SYG2-350CA SYG2-400CA-A SYG2-160CA SYG2- 160CNCA Various Various G Used for normal temperature, light load bearing at places in contact with water or steam. Molybdenum disulphide lubricant SYG2-400M 400 g (10 per case) Belows type G Used for places with heavy load.