Komatsu — SUCTION-SAFETY VALVE

STRUCTURE AND FUNCTION SWING MOTOR 12 SUCTION-SAFETY VALVE FUNCTION When the swing is stopped, the outlet port circuit of the motor is closed by the control valve, but the motor continues to be turned by the inertia of the swing. As a result, the pressure at the outlet port of the motor be- comes abnormally high and there is danger that the motor will be dam- aged. The safety valve is installed to prevent this problem. It acts to release the abnormally high pressure oil from the outlet port of the motor to port S , and also functions as a swing brake. The suction valve supplies an amount of oil equivalent to the amount of oil released by the safety valve.

It sends this oil from port S to the inlet port of the motor to prevent any cavitation. OPERATION 1. When Starting Swing If the swing control lever is operated to swing to the right, the pressur- ized oil from the pump passes through the control valve and is supplied to port MA . When this happens, the pressure at port MA rises and the starting force is generated in the motor, so the motor starts to turn. The oil from the outlet port of the motor flows from port MB through the control valve and returns to the tank. 2. When Stopping Swing When the swing control lever is returned to the neutral position, no more pressurized oil is supplied from the pump to port MA .

At the same time, the oil from the outlet port of the motor returns from the control valve to the tank, and the circuit is closed. The pressure at port MB rises, and rotating resistance to the motor is generated, so the brake starts to take effect. If the pressure at port MB rises to the set pressure of safety valve (1), safety valve (1) opens and re- leases the pressurized oil at port MB to port S . No pressurized oil is supplied at port MA , but the swing continues and negative force is generated. When this negative pressure drops to the set pressure of suction valve (2), suction valve (2) opens and oil is supplied from port S to prevent cavitation. PC300LL-6 10-7