DISASSEMBLY AND ASSEMBLY IDLER AND RECOIL SPRING 12 IDLER AND RECOIL SPRING REMOVAL 1. Remove track shoe and chain. For details, see TRACK SHOE. # Remove lubricator (1). 2. Sling the idler and recoil spring (2) and pull out to the front to remove. # Fit wire to the idler and spring of the idler and recoil spring assem- bly, and adjust the balance when removing. Idler and recoil spring .................................................. 610 kg 3. Disconnect recoil spring (4) from idler Idler .............................................................................. 240 kg Recoil spring ................................................................
370 kg INSTALLATION G Carry out installation in the reverse order of removal. # When installing the idler and recoil spring, assemble so that the position of the greasing plug on the idler is on the outside for the right side of the machine and on the inside for the left side of the machine. 30-24 PC300LL-6