Group 28 Troubleshooting MID 128 PPID 272 Air Pressure Compensation MID 128 PPID 326 Soot Level 36 Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause: FMI 4 • Voltage below normal or shorted to low source • Short Circuit - • Possible turbo noise • Faulty Intake Air Temperature and Humidity (IATH) sensor • Faulty harness • Faulty Intake Air Temperature and Humidity (IATH) sensor connector FMI 5 • Current below normal or open circuit • Short Circuit + • Open Circuit • Possible turbo noise • Faulty Intake Air Temperature and Humidity (IATH) sensor • Faulty harness • Faulty Intake Air Temperature and Humidity (IATH) sensor connector Type of fault: FMI Description:
Fault Condition: Possible Symptoms: Possible Cause: FMI 0 • Data valid but above normal operational range • Moderately high soot load • Medium to high engine derate • Diesel Particulate Filter (DPF) clogged • After Treatment Fuel Injector clogged • Regeneration disabled by driver or other component FMI 11 • Critically high soot load • Critically high soot load • High engine derate • Engine derate • Diesel Particulate Filter (DPF) clogged • After Treatment Fuel Injector clogged • Regeneration disabled by driver or other component