Group 28 Troubleshooting MID 130 PID 36 Clutch Wear, Status MID 130 PID 37 Air Pressure, Transmission 61 Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause: FMI 0 • Data valid but above normal operational range • The clutch wear is more than or equal to "SERVICE DUE POSITION" • Yellow lamp is sent • If active for a long period of time the clutch may completely wear out and fail • N/A Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause:
FMI 0 • Data valid but above normal operational range • Sensor signal is in normal range • Pressure is above 145 PSI (10.0 bar) • Yellow lamp is sent • Slow clutch performance • N/A FMI 1 • Data valid but below operational range • Sensor signal is in normal range • Pressure is below 72.5 PSI (5.0 bar) • Yellow lamp is sent • The symbol for compressed air, transmission is sent • Gear changes may be absent • Slow clutch performance • N/A FMI 3 • Voltage above normal or shorted high • The sensor signal is above normal range • Yellow lamp is sent • N/A FMI 5 • Current below normal or open circuit • The sensor signal is below normal range • Yellow lamp is sent • N/A