(5) Place ring gear on the case by matching it with knock pin hole. (6) Insert 2 knock pins by using jig. Be sure to check the hole location of oil gage before inserting. 11 13 4 Screw drain plug into drain plug (15) after winding sealing tape. (7) 15 (8) Mount No.2 carrier assembly (12) in the case sub assembly and install bolts into 2 TAP holes (M6) as shown in figure. Turn the carrier slowly by hand to adjust the matching holes when assembling. 12 (9) 7 Install No.2 sun gear (7). Be sure to check the direction of sun gear (7) when assembling. 7-26