(6) Re-insert the new sealing ring (11) in the motion input cover (10). Pay particular attention to the direction of assembly of the rings (11). Lubricate the lip of the sealing ring with grease. Zero the depth gauge between the cover surface and bearing contact surface. (7) (8) Measure distance “A” between the surface and thrust block. · Example : A = 0.50 (9) Calculate thickness “S” of the shims by using this formula : S = A - Y = S, where Y is the predefined axial backlash. Y = backlash = 0.15 ± 0.35 mm Example : S=A-Y=0.50-0.25=0.25 mm =S Make up the appropriate pack of shims. 7-75