Remove the bearing (75) from the input shaft (73). (26) (27) Measure distance “B” between the cover surface and bearing contact surface. · Example : B = 0.45 Calculate thickness “S2” of the shims by using this formula : S2 = B - Y = S2, where Y is the predefi- ned axial backlash. Y = backlash = 0.15 ± 0.35 mm Example : S2 = B-Y = 0.45 - 0.25 = 0.20 mm = S2 (28) Make up the appropriate pack of shims. (29) Using a normal tool, push the bearing (36) and shims into its seat in the cover (40). 7-80