hyundai R60WVS Pro — 7. AXLE

③ Using special tool T3 apply a reposition- able jointing compound for seals to the outer surface of the sealing ring (44). Position the sealing ring (44) in the steering case (14). Check that the ring (44) is correctly oriented. ④ If the bottom articulation pin (17) has been extracted, position the pin under a press and fit the ball cover (20). Fit the front sealing rings (18) (8) onto the articulation pins (4) and (6). ⑤ Carefully check that the rings are proper- ly oriented (18) (8). ⑥ Lubricate the top bush (7) or the bottom ball bush (17) and fit them into the fulcrum holes of the arm. 7-113