(7) Apply torque meter TM to pinion nut and check that torque will increase by 0.04~0.06 kgf · m (0.29~0.43 lbf · ft ) as a result of differential bearing preload. Example : pinion torque : 0.08~0.12 kgf · m (0.59~0.87 lbf · ft ) Pinion + differential torque : 0.12~0.18 kgf · m (0.87~1.3 lbf · ft ) (8) Position comparator on the center of one of the crown teeth, preset it to 1 mm and reset it to zero. Manually move the crown in both direc- tions to check the existing clearance between pinion and crown. Gap = 0.13~0.20 mm + Sc (3) - Sb (7) = reduction gap ring and pinion (9) (10) - Sc (3) + Sb (7) = increase gap ring and pinion 7-175