hyundai R60WVS Pro — 7. AXLE

⑫ Tighten nuts (23) in two stages, using the criss-cross method. · Initial torque wrench setting : 9.18 kgf · m (66.4 lbf · ft ) · Final torque wrench setting : 10.2 kgf · m (73.8 lbf · ft ) ⑬ Check the continuous rolling torque on the hub. · Torque : 0.71~2.04 kgf · m (5.14~14.8 lbf · ft ) ⑭ Install the axle shaft (27), making sure that it is properly inserted into braking disks and differential unit. Check the condition and position of the O-ring (25). 7-193