① Zero the centesimal calibre between the support plane and the centring arm. ② Then measure the distance between the arm support plane and the piston pack stop. ③ Measure the distance between the disk support plane and the arm support plane. Subtract the value “B” from the value “A” to obtain the effective dimension “C” of the arm containing the brake disks and the piston pack. ④ Bring the disk pack beneath a press, load with 1000 kg , then measure the dimen- sion “D”. Add the play “G” and the fixed value “F” (equal to 0.2 mm ) to the value “D”. Do not take into account the thickness between the press piston and the disks. 7-204