⑨ Position the shim washer (15) on the crown (11). In order to hold the shim washer (15) in position, apply grease to it. ⑩ Position the crown (11) on the differential carrier and lock it with screws (24) applied with loctite 270. Secure the screws using the cross-tight- ening method. ⑪ Tighten screws with a torque wrench: see table. Always use new screws to fix the crown wheel. In case the screws are not thread locking pretreated, use loctite 270. ⑫ Assemble the bearing (13). Heat the bearing to 100˚C before assem- bling. 7-222