5) BEVEL PINION BEVEL PINION Assembly diagram Assembly diagram (1) (1) 11 8 4 9 5 10 14 12 7 3 8A 1 6 2 (2) (2) Disassembly Disassembly ① Make positional marks across nut (1) and pinion (11) tang; If disassembly is awkward, heat the check nut (1) of the flange (2) at 80˚C. Heating is meant to unloose the setting of loctite on the nut (1). ② Position tool T6, so as to avoid pinion rotation. Unloose and remove the nut (1); also remove the O-ring (6). 7-228