DISASSEMBLY 1) Fixing the joysticks on available Fixture or Bench vice Be attention to protect the body by covering closes or soft rubber, 2) Loosening the rubber bellow and unfold it, Rubber bellow unfold direction Fixture lock force direction 3) Remove the circle rubber bellow(14) and after to the handle kits(20), to use one wrench fix the Link nut(18), and another wrench to loosen lock nut(19) Fix wrench loosen wrench remove 4) Remove the link nut(18), it need an auxiliary Pin or screwdriver to insert the hole on the selector(17), the loosen the link nut(18). And after to remove the Selector(17) by the screwdriver too 7-247