(4) (4) ① Overall assemble Overall assemble Place a V-block on a rigid work bench. Mount the tube assembly (1) on it and fix the assembly by passing a bar through the clevis pin hole to lock the assembly. Insert the rod assembly in to the tube assembly, while lifting and moving the rod assembly with a crane. Be careful not to damage piston seal by thread of tube assembly. Fix with a bar Lift Straight ② Appply liquid packing 2 ③ Match the bolt holes in the cylinder head flange to the tapped holes in the tube assembly and tighten socket bolts to a specified torque. Refer to the table of tightening torque. Hook spanner Turn clockwise Cover here with rag 7-275