Komatsu — 20. TESTING AND ADJUSTMENTS

TESTING AND ADJUSTMENTS Normal or standard technical data............................. 2 Testing and adjustment of gearing chain tension.....25 Special tools ............................................................ 14 Control and regulation of the pressures in the hydraulic circuits.......................................................26 Checking the engine speed ..................................... 15 Adjustment of valve clearance................................. 16 Testing the hydraulic pump ......................................27 Measurement of the compression pressure ............

17 Valve calibration .......................................................28 Control and adjustment of the fan belt tension ........ 18 Checking the travel deviation ...................................30 Control and adjustment of the injection timing......... 19 Checking engine oil pressure .................................. 21 Control valve ............................................................32 Control and regulation of the servo-control power supply ............................................................33 Adjusting the stroke of the accelerator cables......... 22 Adjustment of the ppc valve clearances ..................

23 Elimination of residual pressures - pressurisation of the tank.....................................................................35 Adjusting the position of the servo-control engagement safety sensor ...................................... 24 Bleeding air from the hydraulic circuits.....................36 When carrying out controls, adjustments or analyses for troubleshooting, park the machine on firm, level ground. Apply all the machine safety devices and use blocks to prevent any machine movement. When more than one person is engaged in the work, use the prescribed notices that indicate that the machine is un- dergoing maintenance.

Do not allow any unauthorised persons to remain in the vicinity. When checking the level of the cooling liquid, wait until this liquid has cooled. If the radiator cap is removed while the liquid is still hot and under pressure, it may cause severe burns. Take great care not to get entangled in moving parts (fan, alternator belt or any of the rotating elements). 20-1 SK714-5 SK815-5