Komatsu — NORMAL OR STANDARD TECHNICAL DATA

TESTING AND ADJUSTMENTS NORMAL OR STANDARD TECHNICAL DATA FOR MACHINE 20-6 SK714-5 SK815-5 Machine model SK714-5 Classifi- cation Check item Test conditions Unit Standard value Permissible value Hydraulic pressure Control valve • Engine speed: 2800 rpm • Oil temperature: 45–55 °C bar 191 181–191 Travel motors 309 260–316 Servocontrol 26 25–28 AS Valve • Macchina sollevata da terra Low idling • Oil temperature: 45–55 °C • Travel levers: forward Set speed – – – – Unloading valve • Engine speed: max. • Oil temperature: 45–55 °C • Travel levers: at neutral – – Pilot system and secondary circuit pressures Pilot system travel forward (start-up) ✽ • Engine speed: 180050 rpm • Oil temperature:

45–55 °C • Machine raised from the ground ✽Pressure of wheels start rotation bar 5.5 4.0–7.0 Pilot system travel (maximum) 14.46 13.7–15.2 Pilot system travel reverse (start-up) ✽ 5.5 4.0–7.0 Pilot system travel reverse (maximum) 14.46 13.7–15.2 Pilot system travel to right or left (start-up) ✽ 5.5 4.0–7.0 Pilot system travel to right or left (maximum) 14.46 13.7–15.2 Pilot system with parking brake disengaged 15 15–22 Engine speed (with load) With travel pump • Engine speed: max. • Oil temperature: 45–55 °C • Travel lever: at full stroke • Parking brake: applied rpm 2800 2800–2950 With travel and equipment pumps • Engine speed: max. • Oil temperature: 45–55 °C • Travel lever:

at full stroke • Parking brake: applied • Raise: at end of stroke 2180 2180–2450