Komatsu — CHECKING THE TRAVEL DEVIATION

TESTING AND ADJUSTMENTS CHECKING THE TRAVEL DEVIATION CHECKING THE TRAVEL DEVIATION # Test conditions: Engine: at working temperature Hydraulic oil temperature: 45 55 °C. # Drive the machine onto solid, level ground. 1. Checking the deviation 1 - Position the boom and bucket in their travelling posi- tions. # Boom lowered and bucket fully curled. 2 - Bring the engine up to maximum rpm. 3 - Push the travel lever to full stroke forwards RKS01270 4 - Travel for 10 metres, then measure the deviation of the machine over the next 20 metres. 5 - Check the deviation also in reverse gear and while ac- celerating in both directions.

Theoretical line of travel 10 m Measure the of the deviation 10 m 10 m RKS01281 20-30 SK714-5 SK815-5