Komatsu — TILTING THE CAB

REMOVAL AND INSTALLATION TILTING THE CAB 8 - Attach the cab (12) to some hoisting tackle. 12 RKSA0290 9 - Remove the safety cotter pin (13) and the washers (14). 10 - Remove the safety cotter pin. 16 16 11 - Push the cab (12) gently towards its “at rest” position to relieve the tension on the safety cables (15), and di- sconnect them from the pins (16). 15 15 Apply a slight tension to the hoisting-tackle chains to prevent the cab from moving unexpectedly. 13 14 13 14 RKSA0280 12 - Tilt the cab (12) slowly until the distance between the centres of the dumper fixing hooks (17) is 1100 mm. # The distance of 1100 mm corresponds to the ma- ximum stretch of the dumper hooks.

12 13 - Remove the pins (16) of the dumper fixing hooks (17). 17 RKSA0291 14 - Position a stand , about 1200 mm high, and tilt the cab (12) until it is resting on the stand. # Make sure that the connecting cables between the cab and the engine are not being strained. A RKSA0300 30-6 SK714-5 SK815-5