REMOVAL AND INSTALLATION BATTERY REMOVAL OF THE BATTERY 1 - Disconnect the negative cable (-- ) (1) and the positive cable (+) (2) from the battery (3) in that sequence. 1 2 3 RKSA0310 2 - Loosen the nuts (4) that secure the battery clamp (5) a release the tie-rods (6) of the battery support. 4 5 7 6 RKSA0320 3 - Tilt the battery clamp (5) towards the front of the ma- chine and lift out the battery. # Disconnect the temperature sensor connector (7) from the battery clamp (5). 5 RKSA0330 INSTALLATION OF THE BATTERY To replace, reverse removal procedure. 30-8 SK714-5 SK815-5