REMOVAL AND INSTALLATION NOZZLE HOLDER REMOVAL OF THE NOZZLE HOLDER 1 - Remove the suction filter (1) and the supporting bracket (2). 1 2 RKSA0390 2 - Remove the high-pressure pipes (3) and the fuel return tubes (4). 1 3 4 RKSA0041 3 - Loosen nuts (5) and remove clips (6). 4 - Remove the complete injection nozzles (7). 2 5 7 6 RKSA0400 INSTALLATION OF THE NOZZLE HOLDER To install, reverse the removal procedure. 1 High-pressure pipe union: 31.85 2.45 Nm 2 Nuts: 78.4 0.98 Nm 30-12 SK714-5 SK815-5