REMOVAL AND INSTALLATION GEAR PUMP REMOVAL OF THE GEAR PUMP Fully raise the working equipment and tilt the cab. (For details, see «TILTING THE CAB»). 1 2 # Drain the hydraulic oil Hydraulic oil: max.. 39 1 - Disconnect from the pump (1) the suction pipe (2) and the pipe (3) (one for the normal version, two for the HI- GHFLOW version. 4 3 RKSA0660 2 - Loosen the two screws (4) and remove the pump (1) complete with the O-ring (5). 1 5 4 RKS01740 INSTALLATION OF THE GEAR PUMP # To install, reverse removal procedure. 1 Screws: 59 74 Nm 30-31 SK714-5 SK815-5