Komatsu — CYLINDERS

STANDARD MAINTENANCE CYLINDERS CYLINDERS 1 2 Lifting bucket: 412 41 Nm Tilt bucket: 441 44 Nm Lifting bucket: 422 42 Nm (Wrench: 32 mm) Tilt bucket: 343 34 Nm (Wrench: 32 mm) with Loctite 262 3 RKS01500 Unit:

mm 40-18 SK714-5 SK815-5 N° Check item Cylinder Criteria Remedy Standard size Tolerance Minimum clearance Clearance limit Shaft Hole 1 Tolerance between bushing and piston rod mounting pin Lifting bucket 35 –0.01 –0.05 + 0.072 + 0.134 0.082– 0.184 1.0 Replace bushing Tilt bucket 35 –0.01 –0.05 + 0.072 + 0.134 0.082– 0.184 1.0 2 Tolerance between bushing and cylinder mounting pin Lifting bucket 35 –0.01 –0.05 + 0.072 + 0.134 0.082– 0.184 1.0 Tilt bucket 35 –0.01 –0.05 + 0.072 + 0.134 0.082– 0.184 1.0 3 Tolerance between piston rod and cylinder head Lifting bucket 35 -- 0.025 -- 0.087 + 0.039 + 0 0.025– 0.126 0.426 Replace head Tilt bucket 30 -- 0.020 -- 0.072 + 0.033 + 0 0.020– 0.105 0.426