STANDARD MAINTENANCE WORKING EQUIPMENT 2 Section D - D Section E- E RKS01161 Unit: mm 40-21 SK714-5 SK815-5 N° Check item Criteria Tolerance Standard Minimum Clearance size clearance limit Shaft Hole Remedy Tolerance Minimum clearance Clearance limit Shaft Hole 1 Clearance between bushing and mounting pin of arm and support fram 35 e –0.01 –0.05 + 0.072 + 0.134 0.082– 0.184 1.0 Replace bushing 2 Clearance between bushing and mounting pin of arm 35 –0.01 –0.05 + 0.072 + 0.134 0.082– 0.184 1.0