DRIVING - Features select when it is necessary to engage a gear. The transmission will exit Neutral Coast Mode and reengage an appropriate gear under any of the following conditions: Vehicle brakes are applied Driver depresses accelerator pedal Cruise control is canceled A mode other than Drive is selected Driver performs up/downshift requests Cruise high or low set speeds are exceeded Maximum vehicle grade is exceeded Request by an adaptive cruise system Various brand names may be used for Neutral Coast systems. at a constant speed at engine idle without the need to apply the accelerator pedal.
The configuration is useful for stop and go applications allowing the vehicle to launch and creep without applying the accelerator. 2 Creep Mode Creep allows the vehicle to be driven at a constant speed at engine idle without the need to apply the accelerator pedal. The configuration is useful for slow speed applications where steady vehicle speed is required. Upshifts and downshifts can be requested to increase or decrease vehicle speed. Urge to Move Urge to Move allows the vehicle to automatically start moving when the transmission is in gear and the driver releases the service brake. After the vehicle has launched the vehicle will creep 24 Y53-1272-1B1 (08/17)