4.2. Lubricating system 4.2.1. General descriptions and main data General descriptions All the engine oil pumped up from the oil pan by the gear type oil pump is filtrated through the oil cooler and oil filter, and this filtrated oil is forced through the main oil gallery in the cylinder block from where it is distributed to lubricate the various sliding parts, and fuel injection pump in order to ensure normal engine performance. Specifications Diagram of lubricating system Rocker arm WAter pump bearing Fuel injection pump Turbocharger Conn.
rod bearing Main bearing Oil spray nozzle Main oil gallery 1.3bar Oil cooler Oil filter Oil pump Relief valve 4.4bar Valve Valve Valve 2bar 10bar 5bar EQM4005I - 85 - Item Specifications Item Specifications Lubricating system Oil pump type Relief valve opening pressure Bypass for oil cooler Opening pressure Adjusting valve for spray nozzle Opening pressure Forced pressure circulation Gear type 10±1.5 kg•cm2 5+1 kg•cm2 1.5 ~ 1.8 kg•cm2 Oil filter type Bypass for filter element Valve opening pressure Bypass for entire oil filter Valve opening pressure Full flow 1.8 ± 2.3 kg•cm2 4.0 ~ 4.8 kg•cm2