daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

4.3.2. Injection pump The components relating to the injection pump should be serviced at regular intervals as the plunger and delivery valve may be worn after a given length of time for use and cause the deterioration of the engine. Make sure that servicing should be performed at the professional maintenance shop as authorized by Bosch or Zexel Company. For adjustment of fuel injection volume, refer to the ‘Specifications of fuel injection pump’ described on the following pages. 1) DE12T (1) Main data and specifications Part No. : 65.11101-7222(106672-9920) Model : NP-PE6P120/720RS3000(106061-7250) Governor : NP-EP/RSV200-1200PD36C311(105407-4720) Timer : without timer Plunger :

12, right hand helix 30 lead Delivery valve : 120 mm 3 /st( 8 x 2.4mm) Fuel feed pump : NP-FP/K-P(105207-1400) (2) Nozzle holder assembly : 65.10101-7300(105160-4351) Pre-stroke : 4.7 mm (3) Nozzle : 65.10102-6046(105029-1330) (4) Injection pipe : 65.10301-7004B (5) Injection order : 1-5-3-6-2-4 (6) Injection timing : BTDC 12 C (7) Calibration data - 90 - Adjusting point Rack position (mm) Pump speed (rpm) Injection volume (mm3/1,000st) Variation rate (%) Basic point Fixing point Ref. A 10.8 900 129±2 ±2 B 11 875 (135)±3 - C Approx.

6.4 250 14.5±1.5 ±15 D - 100 193.5±10 - Content Specification Engine Application Adjusting conditions Nozzle holder assembly Nozzle Nozzle holder Opening pressure Injection pipe Fuel delivery pressure Fuel temperature 105780-8140 105780-0000 105780-2080 175 kg•cm2 8 x 3 - 600 mm 1.6 kg•cm2 35 ~ 45 ˚C 65.10101-7300 65.10102-6046 - 220 kg•cm2 6 x 2.2 - 650 mm - 35 ~ 45 ˚C