2) P126TI (1) Main data and specifications Part No. : 65.11101 -7310 (106674-4130 ZEXEL) Model : NP-PE6P120/700RS3S (106067-6020) Governor : GAC electric (65.11501-7002A) Plunger & barrel : 12, right hand double helix 30 lead Delivery valve : 90mm 2 /st ( 7 x 2.35mm) Fuel feed pump : NP-FP/KD-PS (105237-5470) (2) Nozzle holder assembly : 65.10101-7054 (10501-8520) Pre-stroke : 3.9 ± 0.05 mm (3) Nozzle : 65.10102-6048 (105019-2450) (4) Injection pipe : 65.10301-6042, 65.10301-6043 (5) Injection order : 1-5-3-6-2-4 (6) Injection timing : BTDC 12° - 92 - (A) Test condition for injection pump Nozzle & Holder Ass’y 105780-8130 Opening pressure :
175 kg•cm2 Injection pipe(ID ,OD ,L) - 3.0 x 8.0 - 600 mm Test oil ISO4113 Temperature :40±5˚C (B) Engine standard parts Nozzle & holder Ass’y 65.10101-7054 Nozzle (5 x 0.37) 65.10102-6048 1st pressure : 160 kg•cm2 2nd pressure : 220 kg•cm2 Injection pipe(ID, OD ,L) 65.10301-6042 65.10301-6043 2.2 x 6 - 600mm Rack diagram and setting valve at each point Standby power Check point Rack position (mm) Pump speed (rpm) Injection Q’ty on RIG (mm3 / 1,000 st) Press. (mmHg) (A) Test condition for inj. pump (B) Engine standard parts B 900 240±3 - - - - - - - - - - - - - - - - - - - - - - - - -