5) Testing (1) Suction capacity test Connect one end of a hose to the inlet Outlet hose side of the feed pump and immerse the other end of it into the fuel tank as illus- trated. Feed pump Hold the feed pump in position about 1 m above the level of fuel in the fuel tank. Operate the tappet at the rate of 100 Inlet hose rpm and check to see if fuel is drawn in and delivered for 40 seconds or so. Fuel tank EQM4022I (2) Delivery test on a pump tester as illustrated. Operate Make a test with the feed pump mounted the pump at the rate of 1,000 rpm and check to see if the pump delivery is more than 405 cc/15 seconds.
(3) Sealing test Plug up the delivery port on the feed pump and apply compressed air of 2 kg/cm2 into the inlet side. Submerge the feed pump in a container of diesel fuel and check for air leak. - 104 - EAMC016I Compressed Mass cylinder air 2kg / cm2 Feed pump EQM4023I