daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

Adjusting shim for secondary opening pressure (Out diameter = 9.5 , Inner diameter = 4.5) Retaining nut a. Take out the dial gauge, nut, holder and gasket from the cap nut. b. Remove the adjusting retaining nut and gasket, and install the original retaining nut. (SW 19mm) Inspection at completion a. Assemble the nozzle holder to a nozzle tester and check the primary opening pressure, spray patterns, oil tightness of seat portion, and oil leakage from each part. b. When replacing the nozzle, replace it with a new “nozzle service kit” integrated with a nozzle, lift piece, and spacer as a complete set. Note :

If only a nozzle is replaced, the amount of pre-lift will deviate from the specified value. - 116 - Part No. Thickness(mm) Part No. Thickness(mm) 1505380-4900 0.40 1505380-5300 0.56 1505380-5000 0.50 1505380-5400 0.58 1505380-5100 0.52 1505380-5500 0.60 1505380-5200 0.54 1505380-5600 0.70 7 EQM4036I EQM4036I 40 60 80 20 0 100 EQM4039I EQM4039I 13 15 A EQM4060I Torque 6.0 ~ 8.0 kg•m