5.2.4. Replacement of oil filter cartridge At the same times of oil exchanges, replace the oil filter cartridge. Drain engine oil by loosening the drain plug on the filter head. Cartridge Caution : Don’t forget tightening the drain plug after having drained engine oil. Loosen the oil filter by turning it counter- clockwise with a filter wrench. With a rag wipe clean the fitting face of the filter body and the oil filter body so that new oil filter cartridge can be seated EA7O5004 Drain plug properly. Lightly oil the O-ring and turn the oil filter until sealing face is fitted against the O-ring. Turn 1-1/4 turns further with the filter wrench. Note :
It is strongly advisable to use DAEWOO genuine oil filter cartridge for replacement. 5.3. Cooling system The coolant must be changed at intervals of 1,200 hours operation or six months whichever comes first. If the coolant is being fouled greatly, it will lead an engine overheat or coolant blow off from the expansion tank. 5.3.1. Coolant draining a) Remove the pressure cap. b) Open the drain valve at the radiator lower part to drain the coolant as the right figure. Drain Valve EA5O4002 - 32 -