daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

2.1.9. Cylinder compression pressure Stop the engine after warming up, and take out nozzle holder assembly. Install the special tool (compression gauge adapter) at the nozzle holder hole, and connect the compression pres- sure gauge there. Condition : Water temperature 20 C, Engine rotation 200rpm (10 rotation) 2.1.10. Injection nozzle EFM1006I Normal Abnormal Abnormal IInstall a nozzle on the nozzle tester. If the inspected injection pressure is less than the specified value, adjust using the adjust- ing shims. Check the atomizing state and repiace it if abnormal.

- 13 - EA9O5003 EA9O5004 Standard value 28kg/cm2 over Limit value 24kg/cm2 Difference between each cylinder Within ± 10 % Engine Model DE 12T P126TI Injection nozzle pressure 220kg/cm2 1st : 160kg/cm2 2nd : 220kg/cm2