3.1.11. Injection pipe Unscrew the hollow screws to disassem- ble the fuel return pipe. Remove the nuts installed on the fuel injection pump and nozzles, then disas- semble the injection pipe. 3.1.12. Intake manifold Remove the air hose connected to the fuel injection pump. Loosen the intake manifold fixing bolts, then disassemble the intake manifold. 3.1.13. Turbo charger Release the clamp screw of the rubber hose connected to the intake manifold, and take off the intake pipes both simul- taneously. Unscrew the exhaust pipe bracket fixing bolts, release the nuts installed on the turbocharger, then disassemble the exhaust pipe.
Remove the turbocharger after removing the oil supply pipe and return pipe and releasing the fixing nuts. - 31 - EQM3009 EQM3009 EQM3011 EQM3011