. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in PTO Case, Add Oil WARNING engine is stopped and may cause serious burns. Wait for the oil 3 - 85 Parts and ately after the temperature to go down before performing thi s operatio NOTIC Park t he machine on flat ground and stop the e ngine. Aft er waitin g for more than 30 minutes after sto pping the engine, chec k the o il lev 1. O pen the door of the air cleaner room 2. R emove dipstick (G), and wipe the oi l off with a cloth. 3. F ully insert dipsti ck (G) into filler pipe (F), then remove 4. T he oil level sho uld be between the H and L marks on the G).
the E If NGINE STOPP ED side of dipstick ( the oil level is b elow the L mark, ad d oil through oil f iller (F). 5. If the oil level is above the H mark on the gauge, drain the etails, see Steps 1 - 2 of "CHANGE OIL IN E 4-68)". on the g auge, d rain the e P xcess oil. For d TO CASE (PAG NOTIC If the oil level is too high , always drain the exc ess oil to b ring the oil to the correc t level. Failure to do this will cause ove