. OPERATION MACHINE OPERATIONS AND CONTROLS 3 - 108 17. Befo re starting op erations, repeat the fol lowing operations slowly 3 to 5 times to circul ate warm oil through the cont Boom operation RAISE ( E) ←→ LOW Arm operation IN (B) ←→ OUT (A) Buck et operation CURL ( D) ←→ DUM When ca rrying out swi ng operations, release swing lock switch (2), check th the swing. Swin g operation Le ft (G) ←→ Trave l (Lo) o peratio n FORWARD (A) ← → REVERSE (B) 18.
Che gree If the hydraulic oil temperatur e monitor i s not displaying green (it is displaying wh ite), repeat Steps 6 to 10 until the displa y is gree If t he hy draulic oil tem perature monitor displ ays green, the hydraulic equipment warm-up operation is completed. After co nfirmin g that t he hydraulic oil tempe rature monitor displays green, carry out the fo llowing procedure.