. OPERATION MACHINE OPERATIONS AND CONTROLS TRAVELING ON SLOPES WARNING Turning or operating the work equipment when working on slopes may cause the machine to lose it balance and turn over, so avoid such 3 - 129 operations. Itis particularly dang If such operations h erous to swing downhill when the bucket is loaded. ave to be performed, pile soil to make a platform (A) on the slope so the machine is kept horizontal during o peration. Do not travel up or d own steep slopes. T here is danger t hat th e machine m ay turn over. When traveling, rais e the bucket approx . 20 to 3 0cm (8 t o 12 i n) from the ground. Do not travel downh Never turn on slope ill in reverse.
s or travel across slopes. Always go down to longer, but it will en Always operate or tr a flat place to perform these operations. It may be sure safety. avel in such a way that it is possible to stop safely at any time if the ma chine slips or becomes un stable. 1. When traveling d own steep hills, use th e travel lever and fuel c e l ontrol lever to k eep the travel speed lo w. an 15°, set the work When traveling down slopes of more th work quipment in the posture shown i n the fi gure on the right, and ower the engine speed. 2. When traveling u p a steep hill of more t han 15° , set the work e quipment to the posture shown i n the d iagram on th e rig ht.