. OPERATION MACHINE OPERATIONS AND CONTROLS Track on One Side Stuck raise the 3 - 131 ESCAPE FRO Always operate c arefully to avoid gett ing stuc k in mud. I f the machine does get stuck in m ud, do as follows to ge the machine out. Place the mac hine push-up switch at high-pressure se t position b). This will in crease the pushing p ower o f the boom a nd make t easier to esc NOTICE When using the boo m or arm to raise the m achine, always have t he bottom of t he bucket in con tact with the ground. T he angle between the boom and arm should be 90° t o 110°. The same applies w hen using the bucket in stalled i n the reverse direction.
mud, track, then lay bo ards or logs an d driv e the m achine out. Tracks on Both Sides Stuck are stuck in mud and they slip, When the tracks on both sides making it impossi ble for the machine to move, lay boards or logs as explained above, and dig the bucket in to the g round in fro nt. Then pul l in the arm as in normal digging o peratio ns and put the travel levers in the FOR WARD position to p ull the machine out .