. MAINTENANCE MAINTENANCE PROCEDURE CHECK WELDED STRUCTURE 4 - 71 (Color check Cracks in we lded structures can be seen easily with a color check. Check the revolving frame, center frame, b oom, and arm eve ry 1000 hours. In particular, carry out a color check on the importa nt check points (marked with a circle). The procedu re for the color check is as follows. 1. Prepare the materials needed for the color chec k. (Detergent, penetrating agent, developing 2. Spray wi th detergent and wash to remove all th e dirt and oil from the place to be checked 3. After wa shing, dry the area, then spray with pen etrating agent and leave for 5 - 20 minutes. 4.
Spray wi th detergent, then clean the surface wit 5. Clean th e surface again, then spray with develo 6. Leave fo r 15 - 20 minutes, then check visually f re any cracks, color can be seen. 7. If there a re any cracks, carry out the repair proc Revolving Center fra