. MAINTENANCE MAINTENANCE PROCEDURE CHECKING CHARGE PRESSURE OF NITROGEN GAS IN ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING carried out. down The pressure in the hydraulic circuit can be released. The accumulator is installed to the position shown in the diagram 4 - 76 The a ccumulator is charged wi th high-pressure nitrogen gas, so mistaken operation may c ause an explosion, whi ch will lead to seriou s injury or damage. Whe n handling the accumulator, alway s do as follows. Th e pressure in the hydraul ic circuit cannot be completely re moved. When removing th e hydraulic equipment , do not stand he direction that the oil s purts out when carrying out the o peration.
In addition, loose n the bolts slowly whe n carrying out operation. Do not disassemble the acc Do not bring it near flame o Do not make holes in it or w Do not hit it, roll it, or subje Wh en disposing of the acc umulator, the gas must be release d. Please contact your K omatsu distributor to h ave this work NOTIC E If the nitrogen gas charge pres sure in the accumulator is low and operations are continued , it will beco me imposs ible to release the re maining pressure inside the hydraulic circuit if a failure oc curs on the machine.
FUNCTION OF ACCUMUL ATOR e pressure in the control circui The a ccumulator stores th after the engine is stopped, the control circuit can be oper the fo llowing actions are po ssible. If t eq he control lever is ope uipment, it is possibl rated in the direction to lower t e for the work equipment to g un der its own weight. on th e right.