Komatsu — OPERATION

. ATTACHMENTS AND OPTIONS AUTO-GREASING SYSTEM OPERATION 6 - 13 CHECK BEFORE STARTING OP ERATIONS Check th at there is ample grease in the grease pail in t he g rease pump inside th e batte ry case. If th e pump has run out o f greas e, replace the grea Check th at the g rease pail is not d ented or deformed. Check th at the auto-greasing/grea ever inside th e batter y case is at the au to-greasing position (A).

OPERATING PROCEDURE FOR AUTO-GREASING SWITCH To opera te the a uto-greasingsyste m, turn the machine starting switch ON, then operate the auto-grea singswitch on the bo x on th e side of the cons ole on the right side of th Operating With Auto-greasing Switch at Auto Positio n When the auto-greasing switch is s et to the AUTO position , the lamp (gr star to operate. When th auto-greasing s greasing operati on will start immed Operating With Auto-greasing Switch at Manual Position When th e auto-greasing switch is set to the MANUAL position, the lamp (green) lights up and the auto-greasing system starts tarts to operat e regardless of the timer.

When us ing the grease gun, set th e auto-greasing switch t o the MANUAL positio n. This position i s also used when checking operation of the g rease pump and w hen bleeding the air from the grease li During m operate. After using the greas auto-greasing sw itch to the AUTO