. ATTACHMENTS AND OPTIONS AUTO-GREASING SYSTEM TROUBLESHOOTING If any problem occurs where the cause is not listed in the above table, please contact your Komatsu distributor for repairs. 6 - 17 There is an auto-greasing war ning lam p and injector actuation indicator at the position to inform of abnormaliti es in the auto-greasing AUTO-GREASING WARNING LAMP (RED) If there i s any abnormality in t he pressurization o f the grease l ine, the buzz er sound s and the wa rning lam p (red) li ghts up.
INJECTOR ACTION INDIC ATOR The indicator pin moves up an d down a ccording to th e increas e or decreas e in pressure in the gr ease line to inform the operator that grease is being s upplied to the greasing points. I f the grease is not being su when th pplied n ormally, the indicator pin does move e ven e pressu re increases detect th e abnormality.
Condition Main cause Action Auto-greasing warning lamp lights up (buzzer sounds) Greasing system is being run with empty grease pail Grease pail is deformed, so air is Replace g being sucked in without follower plate going down Grease is leaking from grease Check, re piping (piping from pump to injector) Grease is leaking from injector Replace Defective pressurization of pump Replace rease pail pair Injector actuation indicator does not work Defective injector Replace NLGI No. 2 or equivalent grease Change to is being used in cold area weather (N equivalent grease for cold LGI No. 0 or )