Komatsu — MONITORING SYSTEM

. OPERATION DETAILED CONTROLS AND GAUGES abnormality. Stop the engine or run it at low idle and wait for the temperature to go down. 3 - 19 If the indicator enters the r ed range (A) to (B), do not carry out operations on steep slop es. The re is danger o f the engine stalling. The correct fuel level may not be displayed for a shor t time whe n the starting switch is tu rned ON , but this is n ot an Hydraulic Oil Temperature Meter (9) displays the hyd During operations, the indi cator should be in the black rang e (A ) to (C).

If the indicator enters red ra nge (A) during operations, the hydraulic oil temperature as gone a hydraulic oil REMARK When the indicator is in th e red range (A) to (B), the hydraulic oil ore than 102°C (215.6°F) ore than 105°C (221°F) temperature is as follows. Red range position (A) : M Red range position (B) : M When the indicator is in th e red range (A) to (B), fuel l evel m onitor (D) lights up red. If the indicator is at positi on (C) when the engine is started, the the hydraulic oil temperature i s 20°C (68°F) or lower, and hydraulic oil temperature monitor (D) li ghts up white. In this case, carry out the warming-up operation.

F or details, see "Hydraulic Equipment Warm Up (PAGE 3-104)". hydraulic oil Service Meter This monitor (10) displays the total time that the machine ha s been operated. Use the time display to s et the maintenance interval. When the e service meter advances even if the ces by 1 for every hour of operation, peed. starting switch is ON, th machine is not moving. The service meter advan regardless of the engine s