. OPERATION DETAILED CONTROLS AND GAUGES Lamp Switch lamps, Machine Push-up Switch WARNING 3 - 36 on orking additional lamps at top front of the ca b, and monito r lighting (a) ON: Lamps l (b) OFF: Lamps When using the bo om thrust force to push up the chassis whe n moving down from a bench , there is dan ger that the machine may suddenly go down and turn over, so set t o the high-pressure setting. This switch (6) is used to switch the sa fety valve set pressure at t he head end of the boom cylinder to two levels . (a) Low pressur e setting: rust force is weak, so swaying of the chassis is The boom th the chassis small during digging operations, a nd digging ca n be performed smoothly.
This is used for general digging o perations on normal ground, soft rock, or blasted rock (b) High pressur The boom th rust force becomes m ore powerful, so i t is easy to twist and sw ing or escape from igging operations usi from soft ground. It effective in performing d bucke of the machine in confined areas.