PACCAR Inc. T680 — Dash Switches

SWITCHES 14. Engine, Brake Level In the up position there will be 100% engine retarding. In the middle position there will be 60% engine retarding. In the down position there will be 33% engine retarding. For more information on when and how to use the engine brake in your vehicle, see the engine brake owner’s manual for additional engine brake information. 17. Engine, Cruise Control Set/Resume The Cruise Control Set/Resume switch allows you to SET the desired speed or RESUME the desired speed after the cruise control function has been interrupted. 19. Engine Fan Override The engine fan switch allows you to control the engine fan manually or automatically.

Please refer to Engine Fan Control on page 4-12 for more information on how to operate this switch. WARNING! WARNING! Do not operate the cruise control when operating on road surfaces with poor traction (wet, icy, or snow covered roads) or in heavy traffic. Accelera tions caused by the normal operation of the cruise control could cause you to lose control of the vehicle resulting in an injury accident. Do not work on or near the fan with the engine running. Anyone near the en gine fan when it turns on could be se riously injured. If it is set at MANUAL, the fan will turn on any time the igni tion key switch is turned to the ON po sition. In AUTO, it could engage sud denly without warning.

Before turning on the ignition or switching from AUTO to MANUAL, be sure no workers are near the fan. 3 15. Engine, Brake On/Off Turn switch on to activate Engine Brake system. For more information on when and how to use the engine brake in your vehicle, see the engine brake owner’s manual for additional engine brake information. 16. Engine, Cruise Control On/Off Turn switch on to activate Cruise Control System. 18. Engine, Ether Start (optional) Momentarily push switch in to activate the Ether Start system. (04/13) Y53-1200-1B1 3-61