SWITCHES 51. Suspension, Dump Turn switch on to deflate Suspension Air Bags. The switch is guarded to protect you from accidentally deflating the suspension. This switch does not require ignition power to maintain the desired switch setting. 52. Suspension, Lift Turn switch on to over-inflate Suspension Air Bags. Turn switch off for normal suspension height. Increasing engine RPM before the PTO is actually engaged could pre vent the PTO from engaging and/or cause PTO damage. CAUTION 53. Suspension, Third Axle Lift Turn switch on to raise Third Axle. This switch does not require ignition power to maintain the desired switch setting. 46.
Power Take-off (PTO), Forward Turn switch on to engage Forward PTO. WARNING! 3 Do not operate the Air Suspension De flate Switch (Dump Valve) while driv ing. Sudden deflation while your vehi cle is moving can affect handling and control and could lead to an accident. Use this switch only when your vehicle is not moving. 47. Power Take-off (PTO), Rear Turn switch on to engage Rear PTO. 54. Pintle Hook Turn switch on to remove the slack from the Tow Hook. 55. Trailer, Axle (3rd Axle) Lift Turn switch on to lift 3rd Trailer Axle. This switch does not require ignition power to maintain the desired switch setting. 48. Roofdenser Turn switch on for roof mounted condenser fan. 49.
Suspension, Axle, Pusher Turn switch on to lower Single or Forward Pusher Axle. This switch does not require ignition power to maintain the desired switch setting. CAUTION 56. Trailer, Axle Lift Forward Turn switch on to lift Forward Trailer Axle. This switch does not require ignition power to maintain the desired switch setting. Operating a vehicle with air suspen sion bags either overinflated or under- inflated may cause damage to drive line components. If a vehicle must be operated under such conditions, do not exceed 5 mph (8 km/h). 50. Suspension, Axle, Tag Turn switch on to lower Tag Axle. This switch does not require ignition power to maintain the desired switch setting.
3-66 Y53-1200-1B1 (04/13)