PACCAR Inc. T680 — Introduction

OPERATING THE BRAKE SYSTEM WARNING! Steering Angle Sensor Re-Calibration Optional ATC Functions Wheel Spin Control (option) For vehicles equipped with ESP “Elec tronic Stability Program” do not re place the vehicle’s steering wheel with an aftermarket or different part num ber than originally supplied. Using a different steering wheel could cause ESP to malfunction causing a loss of vehicle control possibly resulting in an accident involving death or personal injury.

Whenever maintenance or repair work is performed to the steering mechanism, linkage, gear, adjustment of the wheel track, or if the steering angle sensor is replaced or the steering wheel is changed or re-centered, the Steering Angle Sensor must be re-calibrated. Your truck/tractor ABS may have an acceleration slip regulation (ASR) or automatic traction control (ATC) feature. This feature is controlled by a switch as shown in the next illustration. Either of these features is monitored by a warning lamp located on the switch. 4 If the Steering Angle Sensor is not re-calibrated, the Yaw Control system will not function properly.

A uncali brated sensor could result in a loss of control of your vehicle which can lead to an accident involving death or per sonal injury. WARNING! Wheel Spin Control Warning Lamp The Traction Control warning lamp on page 3-37 will briefly illuminate and then go out when the ignition switch is first turned on. The traction control warning lamp will illuminate whenever the ASR or ATC system detects drive wheel spin. The lamp will remain illuminated as long as wheel spin is 4-30 Y53-1200-1B1 (04/13)