PACCAR Inc. T680 — Cruise Control Switch

CRUISE CONTROL Press the ON/OFF button if the vehicle has dash board mounted cruise control switches or the CANCEL button if the vehicle has cruise control switches on the steering wheel. Using Cruise Control for Stationary PTO Operation Press the "OFF" button (or the steering wheel mounted "CANCEL" button). Setting Idle Speed NOTE 1. Ensure parking brakes are applied. Cruise control functions and features may vary depending upon which en gine you have. For specific expla nation of your cruise control, see the cruise control or engine manual in cluded with your vehicle. Resuming Cruise Control 2. Ensure transmission is in Neutral. 1.

If you tapped the brake or clutch pedal, the cruise control remembered the previously set cruise speed. To resume that set speed, accelerate above the minimum cruise control speed and press the "RESUME" button. 3. Engage PTO per the manufacturer's operating instructions. 4 4. Press the "ON" button. 5. Press the "SET" button to obtain the desired engine rpm. This vehicles electronic system will perform a ‘rationality check’ every time the vehicle is started. This check is to ensure that the service brakes are working before allowing cruise control to function. This safety feature is designed to ensure that a driver is able to cancel the cruise set speed by using the service brake pedal.

The system will not allow cruise control operation if it does not pass the ‘rationality check.’ The instrument cluster will prompt you to press the service brake pedal if it 2. If you pressed the "OFF" button (or the steering wheel mounted "CANCEL" button) or turned the ignition key OFF, this cleared the system memory and you will need to set a new cruise speed. Cancelling Cruise Control You can cancel cruise control in any of these ways: Tap the brake pedal. Tap the clutch pedal. 4-36 Y53-1200-1B1 (04/13)